PiLas

The Picosecond Laser Diode Systems

The PiLas Systems are diode lasers emitting very short optical pulses with pulse widths down to 18 ps (FWHM), depending on the laser diode used. The standard system consists of a digital electrical pulse generator EIG, an optical head with a laser diode and a collimating optics (paralleling optics, single mode fiber output or multimode fiber output versions are also available). The laser diodes of the various models are pre-configured to emit on a fixed wavelength within a spectral range between 375 nm and 1550 nm, i.e. from ultraviolet to infrared, based on all commercial available diode wavelengths. Typical peak powers are in the range of 20 mW to more than 1000 mW, depending on the laser diode used. The jitter between electrical trigger and optical pulse is about 3 ps - 4 ps. Special wavelengths or specifications are – if technically possible – available on request.

• PiLas Digital Control Unit (EIG1000D)

• Optical Heads (PILxxx) for 375 nm – 1550 nm)

• PiLas 100 MHz control Unit (EIG1000AF)

• Optical Heads (PILxxxF) for 400 nm – 1550 nm, other wavelengths on request

Advanced Laser Diode Systems A.L.S. GmbH
Schwarzschildstr. 6, D-12489 Berlin
Phone/Fax + 49 (0) 30 6392 652- 0/1